
| Suitable Environment | · Group I (mines), Group II (industrial gas), Group III (dust) · Zone 1, Zone 2, Zone 21 and Zone 22 |
| ATEX Equipment Marking | · Ex I M, Ex II 2GD · Ex db I Mb, Ex eb I Mb · Ex db IIC Gb, Ex eb IIC Gb, Ex tb IIIC Db · IP66/68 |
| IECEx Equipment Marking | · Ex db I Mb and Ex eb I Mb · Ex db IIC Gb and Ex eb IIC Gb · Ex tb IIIC Db · IP66/68 |
| UL Equipment Marking | · Class I, Zone 1, AEx d IIC Gb, AEx e IIC Gb · Zone 21, AEx tb IIIC Db |
| Ingress Protection Rating | · IP66,IP68(5 bar,30 min) |
| Type Rating | · Type 4X |
| Material | · Nickel-plated brass, stainless steel 316L |
| Seal Material | · Chloroprene rubber, silicone |
| Operating Temperature | · Chloroprene rubber: -40°C to +100°C · Silicone: -60°C to +130°C |
| Thread Type | · Metric, NPT; other threads such as PG and G available on request |
| Accessories | · Lock nuts and gaskets (washers) |
| Remarks ⚠️ | · All accessories must be ordered separately |
ATEX, IECEx, UL, CSA, EAC, CCC, DNV and INMETRO approvals, as listed in the source.
Class I, Zone 1 and 21, and Zone 2 and 22; Ex db, eb, tb.
Suitable for explosive gas and dust atmospheres in Zone 1 and 2, and Zone 21 and 22.
Suitable for North American Class I Zone 1 and Class I Zone 21 applications.
Ambient operating temperature: −60°C to +130°C.
Ingress protection up to IP66/IP68.
Seals unused cable entries in explosion-protected equipment while maintaining its explosion-protection and ingress-protection performance.
Recessed hexagonal drive saves space and simplifies installation; install with an Allen key.
| Certification Mark | Approval | Certificate No. | Applicable Standards |
|---|---|---|---|
![]() |
ATEX | CESI 13 ATEX 066X | EN 60079-0, 1, 7, 31 |
![]() |
IECEx | IECEx CES 13.0022X | IEC 60079-0, 1, 7, 31 |
![]() |
UL | E467237 | UL514B, UL50E, UL 2225, CSA22.2 No 18.3-12, No 94.2-15, No. 14-18 |
![]() |
UL | E493186 | UL 60079-0, 7, 31 |
![]() |
EAC | RU-CTR.AA87.B.01120/23 | ГОСТ 31610.0; ГОСТ IEC 60079-1, 7, 31 |
![]() |
INMETRO | DNV 17.0055 X | ABNT NBR IEC 60079-0, 1, 7, 31 |
![]() |
DNV Type Approval | TAE00003WU | |
![]() |
UKCA | CML 22UKEX1184X | |
![]() |
CCC | No 2021312313000414 |
| Thread Size | TL | SW | Outer Ø 'D' | Max. Height 'H' | Product Code |
|---|---|---|---|---|---|
| M16x1.5 | 15.5 | 10 | 22.0 | 3.5 | MB-TS01M |
| M20x1.5 | 15.5 | 10 | 26.0 | 4.5 | MB-TS1M |
| M25x1.5 | 15.5 | 10 | 30.0 | 4.5 | MB-TS2M |
| M32x1.5 | 15.5 | 14 | 37.0 | 4.5 | MB-TS3M |
| M40x1.5 | 17.5 | 14 | 46.0 | 4.5 | MB-TS4M |
| M50x1.5 | 17.5 | 14 | 56.0 | 4.5 | MB-TS5M |
| M60x1.5 | 17.5 | 14 | 68.0 | 4.5 | MB-TS60M |
| M63x1.5 | 17.5 | 14 | 70.0 | 4.5 | MB-TS6M |
| M70x1.5 | 20.0 | 14 | 78.0 | 4.5 | MB-TS70M |
| M75x1.5 | 20.0 | 14 | 83.0 | 4.5 | MB-TS7M |
| M80x1.5 | 20.0 | 14 | 88.0 | 5.0 | MB-TS80M |
| M85x1.5 | 20.0 | 14 | 94.0 | 5.0 | MB-TS85M |
| M90x1.5 | 20.0 | 16 | 98.0 | 5.0 | MB-TS8M |
| M100x1.5 | 20.0 | 16 | 108.0 | 5.0 | MB-TS9M |
| M110x1.5 | 20.0 | 16 | 118.0 | 5.0 | MB-TS10M |
| Thread Size | TL | SW | Outer Ø 'D' | Max. Height 'H' | Product Code |
|---|---|---|---|---|---|
| NPT 3/8 | 15.0 | 6 | - | - | B-TS01N |
| NPT 1/2 | 20.0 | 10 | - | - | B-TS1N |
| NPT 3/4 | 20.0 | 10 | - | - | B-TS2N |
| NPT 1 | 25.0 | 14 | - | - | B-TS3N |
| NPT 1 1/4 | 25.0 | 14 | - | - | B-TS4N |
| NPT 1 1/2 | 25.0 | 14 | - | - | B-TS5N |
| NPT 2 | 25.0 | 14 | - | - | B-TS6N |
| NPT 2 1/2 | 32.0 | 14 | - | - | B-TS7N |
| NPT 3 | 32.0 | 16 | - | - | B-TS8N |
| NPT 3 1/2 | 32.0 | 16 | - | - | B-TS9N |
| NPT 4 | 33.0 | 16 | - | - | B-TS10N |
Copyright © 2025 Changzhou Beeling Industry & Trade Co., Ltd All Rights Reserved. | 苏ICP备2022029472号-1
Powered by zzw